Reference Manual for the MR814 v3 Cable/DSL Wireless Router

2-6 Introduction

202-10039-01

The Router’s Front Panel

The front panel of the MR814 v3 router contains the status lights described below.

Figure 2-1: MR814 v3 Front Panel

You can use the status lights to verify connections. Viewed from left to right, the table below

describes the lights on the front panel of the router.

Table 2-1. Status Light Descriptions

Label Activity Description
Power On Green Solid
Off Power is supplied to the router.
Power is not supplied to the router.
Test Blinking
Off The router is performing its diagnostic test.
The router successfully completed its diagnostic test.
Wireless On
Off The Wireless port is initialized and the wireless feature is enabled.
The wireless feature is turned off or there is a problem.
Internet On
Blink The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LAN On (Green)
Blink (Green)
On (Yellow)
Blink (Yellow)
Off
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.
0OWER )NTERNET0ORT
7IRELESS ,!.0ORT
4EST