Reference Manual for the MR814 v3 Cable/DSL Wireless Router

c.Follow the instructions on the screen to enable the wireless feature.

Figure 3-6: Enable the wireless feature

d.Enable your wireless network, click Next to proceed, then click Done to finish. If you have trouble connecting to the Internet, see “Troubleshooting Tips” on page 3-8to correct basic problems.

Note: The Smart Wizard configuration assistant only appears when the router is in its factory default state. After you configure the router, it will not appear again. You can always connect to the router to change its settings. To do so, open a browser such as Internet Explorer and go to http://www.routerlogin.net. Then, when prompted, enter admin as the user name and password for the password both in lower case letters.

You are now connected to the Internet and the wireless feature of the router is enabled! Next, configure your wireless computer.

3-6

Connecting the Router to the Internet

202-10039-01

Page 30
Image 30
NETGEAR MR814 v3 manual Enable the wireless feature