NETGEAR WG111U Configuring Windows 95, 98, and Me for TCP/IP Networking, Installing a New Adapter

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

Configuring Windows 95, 98, and Me for TCP/IP Networking

As part of the computer preparation process, you need to manually install and configure TCP/IP on each networked computer. Before starting, locate your Windows CD; you may need to insert it during the TCP/IP installation process.

Installing or Verifying Windows Networking Components

To install or verify the necessary components for

IP networking:

1.On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.

2.Double-click the Network icon.

The Network window opens and displays a list of installed components.

3.Make sure that the following components are installed:

•Client for Microsoft Networks

•Ethernet Adapter

•TCP/IP

4.The Primary Network Logon should be set to Client for Microsoft Networks.

5.If any of these items needs to be installed, follow the steps below.

Note: It is not necessary to remove any other network components shown in the Network window in order to install the adapter, TCP/IP, or the Client for Microsoft Networks.

Installing a New Adapter

If you need to install a new adapter, follow these steps:

a.Click the Add button.

b.Select Adapter, and then click Add.

c.Select the manufacturer and model of your Ethernet adapter, and then click OK.

Preparing Your Network to Work with a Router Appendix C-5

202-10065-01