User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U
Basic Setup 3-5
202-10065-01
For Windows XP Users Installing a WG111U
Install the WG111U driver and
configuration utility software.
a. Power on your PC, let the operating
system boot up completely, and log in as
needed.
b. Insert the Resource CD for the WG111U
into your CD drive. The CD main page
shown at the right will load.
c. Click Install Driver and Utility.
Follow the InstallShield Wizard steps.
You will be prompted to choose the
country you are located in. Select your
location from the list.
d. Click Finish when done, and if
prompted restart your computer.
WG111U Resource CD
Note: If this screen fails to load automatically,
browse to the CD and double-click on
autorun.exe.
InstallShield Wizard
Note: If a Windows XP Certification warning
appears, click Continue Anyway to proceed.