User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

3.Set the TCP/IP Properties.

The TCP/IP Properties dialog box displays.

a.Click the IP Address tab.

b.Select the radio button marked

“Obtain an IP address from a DHCP server”.

c.Click OK. This completes the configuration of TCP/IP in Windows NT for this computer.

d.Restart the computer.

e.Repeat these steps for each computer with this version of Windows on your network.

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your computer’s TCP/IP configuration:

1.On the Windows taskbar, click the Start button, and then click Run. The Run window opens.

2.Type cmd and then click OK. A command window opens.

3.Type ipconfig /all

Your IP Configuration information is listed, and should match the values below if you are using the default TCP/IP settings that NETGEAR recommends for connecting through a router or gateway.

TCP/IP Configuration

Current NETGEAR Standard

Previous NETGEAR Standard

 

 

 

Computer or workstation

192.168.1.2 through

192.168.0.2 through

IP Address

192.168.1.254

192.168.0.254

 

 

 

Subnet mask

255.255.255.0

255.255.255.0

 

 

 

Gateway address for router

192.168.1.1 default address

192.168.0.1 default address

 

 

 

4. Type exit

Preparing Your Network to Work with a Router

Appendix C-15

202-10065-01

Page 95
Image 95
NETGEAR WG111U user manual Verifying TCP/IP Properties for Windows XP, 2000, and NT4, Set the TCP/IP Properties