NETGEAR WG302NA Click Radius Server Settings in the Security menu, Enter the Radius settings

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

2.Click Radius Server Settings in the Security menu.

Figure 3-12: Radius Server Settings

3.Enter the Radius settings.

•Authentication/Access Control Radius Server Configuration: This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server

•IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

•Port Number: Port number of the Radius Server. The default is 1812.

Basic Installation and Configuration 3-23

July 2005 v3.0