Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

2.Click WEP/WPA Settings in the Security menu of the WG302.

Figure 3-17: WEP/WPA Settings menu

3.Choose WPA2-PSKfrom the list.

4.Enter the pre-shared key passphrase.

5.Click Apply to save your settings.

How to Configure WPA and WPA2 with Radius

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

Note: Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings.

Basic Installation and Configuration

3-29

July 2005 v3.0

Page 51
Image 51
NETGEAR WG302NA manual How to Configure WPA and WPA2 with Radius, 17 WEP/WPA Settings menu