How to Configure Wireless Repeating | NETGEAR WG302NA instruction

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

•All WG302 Access Points use the same SSID, Channel, authentication mode, if any, and encryption in use.

•All Point-to-Point APs must have AP2’s MAC address in its Remote AP MAC address field.

3.Verify connectivity across the LANs.

•A computer on any LAN segment should be able to connect to the Internet or share files and printers with any other PCs or servers connected to any of the three LAN segments.

•Wireless stations will not be able to connect to the WG302 Access Points in the illustration above. If you require wireless stations to access any lan segment, you can additional WG302 Access Points configured in Wireless Access Point mode to any LAN segment.

Note: You can extend this multi-point bridging by adding additional WG302s configured in Point-to-Point mode for each additional LAN segment. Furthermore, you can extend the range of the wireless network with NETGEAR wireless antenna accessories.

How to Configure Wireless Repeating

Wireless PC

Associated with AP1

Wireless PC

Associated with AP3

Wireless PC

Associated with AP2

Figure 5-9: Multi-Point bridging

1.Configure the Operating Mode of the WG302 Access Points.

–WG302 (AP1) on LAN Segment 1 in Repeater mode with the Remote MAC Address of AP2.

–Configure WG302 (AP2) in Repeater mode with MAC addresses of AP1 and AP3.

Advanced Configuration

5-11

July 2005 v3.0

Image 81

NETGEAR WG302NA manual How to Configure Wireless Repeating

Contents

July 2005 Technical Support Placement and Range Guidelines Declaration of Conformity Industry Canada Compliance Statement Product and Publication Details Contents Chapter Management Appendix a Specifications Appendix C Command Line Reference Audience, Scope, Conventions, and Formats Chapter About This Manual How to Use This Manual Printing a Page in the Html View How to Print this Manual About This Manual Chapter Introduction Supported Standards and Conventions Key Features AutoCell-The Self-Organizing Wireless Network Autosensing Ethernet Connections with Auto Uplink 802.11g Standards-based Wireless Networking System Requirements Compatible and Related Netgear Products Hardware Description What’s In the Box?Support Registration card WG302 front and rear hardware functions are described below Test Following table explains the LED indicators This socket connects to the WG302 12V 1.2A power adapter WG302 provides two detachable antennaMale DB-9 serial port for serial DTE connections Observing Placement and Range Guidelines Chapter Basic Installation and Configuration Cabling Requirements Feature Factory Default Settings Default Factory Settings LUHOHVVDWD 6HFXULW\2SWLRQV Understanding WG302 Wireless Security Options SET UP the WG302 Access Point Installing the WG302 Access Point Login window Login result WG302 home Web browser will then display the WG302 settings Basic Settings menu Configure the settings appropriate for your network Deploy the WG302 Access Point Verify Wireless Connectivity Using the Basic IP Settings Options How to Log In to the WG302 Using Its Default IP Address Access Point Name NetBIOS Select the time zone location for your setting Understanding Basic Wireless Settings Basic Installation and Configuration Basic Installation and Configuration Understanding WEP/WPA Security Options Wireless Security Settings Basic Installation and Configuration Port Shared Secret Before You Change the Ssid and WEP Settings How to Set Up and Test Basic Wireless Connectivity Select the Turn Access Control On check box How to Restrict Wireless Access by MAC Address How to Configure WEP To configure WEP data encryption, follow these stepsChoose Open System or Shared Key authentication Click Apply to save your settings How to Configure WPA with Radius Enter the Radius settings Click Radius Server Settings in the Security menu 13 Wireless Settings menu 14 WEP/WPA Settings menu How to Configure WPA-PSK 15 Radius Server Settings menu How to Configure WPA2 with Radius Enter the Radius settings 16 WEP/WPA Settings menu How to Configure WPA2-PSK 17 WEP/WPA Settings menu How to Configure WPA and WPA2 with Radius 18 Radius Server Settings menu Enter the Radius settings 19 WEP/WPA Settings menu How to Configure WPA2-PSK and WPA2-PSK 20 WEP/WPA Settings menu Basic Installation and Configuration Remote Management Chapter Management Using the Secure Telnet Interface How to Use the CLI via the Console PortThese settings appear below the connector on the back panel Press the return key, and the screen below should appear CLI Commands Syslog and Activity Log information Using Syslog and Activity Log Information Viewing General, Log, Station, and Statistical Information Wireless Access Point Status screen General Information Fields This screen shows the following parameters Statistics Field Description Wired Ethernet Received/Transmitted Viewing a List of Available Wireless Stations Rogue AP Detection menu Detecting a Rogue Access Point Upgrading the Wireless Access Point Software Saving and Retrieving the Configuration Configuration File Management Restoring the WG302 to the Factory Default Settings Using the Reset Button to Restore Factory Default SettingsChanging the Administrator Password Set Password menu Management Understanding Advanced IP Settings for Wireless Clients Chapter Advanced Configuration AutoCell RF Management Understanding Advanced Wireless Settings Auto RF Management AutoCell AP/Client Interaction Additional AutoCell View Management Options Wi-Fi Multimedia WMM Setup Table below describes the advanced wireless parameters Configuring Wireless LAN Parameters Hotspot Settings screen Hotspot Settings Advanced Wireless Settings Access Point Mode settings Enabling Wireless Bridging and Repeating Point-to-Point Bridge How to Configure a WG302 as a Point-to-Point Bridge Configure the Operating Mode WG302 AP1 on LAN How to Configure Multi How to Configure Wireless Repeating Advanced Configuration No lights are lit on the access point Chapter Troubleshooting LAN light is not lit Wireless LAN activity light does not light up When I enter a URL or IP address I get a timeout error Cannot connect to the WG302 to configure it Using the Reset Button to Restore Factory Default Settings Specifications for the WG302 Appendix a Specifications Specifications Wireless Networking Overview Infrastructure ModeThis chapter provides an overview of Wireless networking Authentication and WEP Data Encryption Ad Hoc Mode Peer-to-Peer WorkgroupNetwork Name Extended Service Set Identification Essid Open System Authentication Authentication 802.11b Authentication Open System Steps Require and available for Same WEP Key. For authentication purposes, the network Key Size WEP Configuration Options Wireless Channels WPA and WPA2 Wireless Security How Does WPA Compare to WEP? How Does WPA Compare to WPA2 Ieee 802.11i? What are the Key Features of WPA and WPA2 Security? Wireless Networking Basics Figure B-3 WPA/WPA2 Overview Figure B-4 802.1x Authentication Sequence Access point replies with an EAP-request identity message WPA/WPA2 Data Encryption Key Management Temporal Key Integrity Protocol Tkip Product Support for WPA/WPA2 Is WPA/WPA2 Perfect? Open system, then 802.1x EAP with Radius or preshared key Open system, then 802.1x supplicant EAP or preshared keyAES WPA2 Changes to Wireless Client Programs Command Sets Appendix C Command Line Reference Command Line Reference Command Line Reference ACL Command Line Reference Command Line Reference Glossary 802.11e Standard Access Point AP Bridge CSMA-CD Carrier Sense Multiple Action/Collision Detection Essid more commonly referred to as Ssid Short Set Identifier Ieee Institute of Electrical and Electronics Engineers MAC Media Access Control PHY Range Site survey TCP/IP War Driving Wi-Fi Protected Access and Ieee 802.11i Comparison Wi-Fi Protected Access in Mixed Mode Deployment Glossary