NETGEAR WG302NA manual Chapter Management, Remote Management

Chapter 4

Management

This chapter describes how to use the management features of your NETGEAR ProSafe Wireless Access Point 802.11g WG302. These features can be found by clicking on the Maintenance heading in the Main Menu of the browser interface.

Remote Management

Access the Remote Management screen by clicking on Remote Management under Management on the main menu.

Figure 4-1: Remote Management screen

Enter the Remote Management information.

•Remote Console, Secure Shell (SSH): If set to Enable, the Wireless Access Point will only allow remote access via Secure Shell and Secure Telnet. The default is Enable.

•SNMP: Enable SNMP to allow the SNMP network management software, such as HP OpenView, to manage the wireless access point via SNMPv1/v2 protocol.

•Public Community Name: The community string to allow the SNMP manager to read the wireless access point's MIB objects. The default is public.

Management 4-1

July 2005 v3.0