•Reorient or locate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Warning for North America, and Australia
Warning! To meet FCC and other national safety guidelines for RF exposure, the antennas for this device (see below) must be installed to ensure a minimum separation distance of 20cm (7.9 in.) from persons. Further, the antennas shall not be colocated with other antenna or radio transmitter.
Antenna Statement for North America and Australia
In addition to its own 2 antennas, the WG302 device has been approved for use with the following detachable antennas and antenna cables:
Approved | Antenna Gain and | Approved Antenna | Antenna Cable | Maximum |
Antennas | type | Cable | Length | Transmitted Power |
NETGEAR | 18 dBi, directional | NETGEAR | 1.5 m to 30 m | 19 dBm + 18 dBi ant. |
ANT24D18 | outdoor/indoor |
|
| |
NETGEAR | 9 dBi, omnidirectional | NETGEAR | 1.5 m to 30 m | 19 dBm + 9 dBi ant. |
ANT2409 | outdoor/indoor |
|
| |
NETGEAR | 5 dBi, ceiling/wall | NETGEAR | 1.5 m to 30 m | 19 dBm + 5 dBi ant. |
ANT24O5 | indoor |
|
|
* WG302 maximum radiated power in North America and Australia: 20 dBm – cable loss + antenna gain
Please go to www.netgear.com/go/wg302_fcc for an updated list of wireless accessories approved to be used with the WG302 in North America and Australia.
Industry Canada Compliance Statement
This Class B Digital apparatus meets all the requirements of the Canadian Interference Causing Equipment Regulations ICES 003.
Cet appareil numerique de classe B respecte les exigences du reglement du Canada sur le materiel brouilleur
The device is certified to the requirements of
v
