NETGEAR manual Mbps Wireless Router WGT624 v4 Reference Manual

108 Mbps Wireless Router WGT624 v4 Reference Manual

5.Click Add to add a wireless device to the wireless access control list. The Available Wireless Cards list displays.

Figure 2-7

6.In the Available Wireless Cards list, either select from the list of cards the WGT624 v4 has found in your area, or enter the MAC address and device name for a device you plan to use. You can usually find the MAC address printed on the wireless adapter.

Tip: You can copy MAC addresses from the Attached Devices page, and then paste them into the MAC Address box. To do this, configure each wireless computer to obtain a wireless link to the wireless router. The computer should then appear in the Attached Devices page.

7.Click Add to add this wireless device to the Wireless Card Access list. The screen changes back to the list screen. Repeat these steps for each additional device you wish to add to the list.

8.Repeat steps 5-7 for each additional device you wish to add to the list.

9.Be sure to click Apply to save your wireless card access list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WGT624 v4.

2-14 Wireless Settings and Security

v1.2, July 2007