NTI VEEMUX VIDEO MATRIX SWITCH
Power Up
1.Plug the VEEMUX into an AC power outlet.
2.Turn ON power to the VEEMUX.
3.Turn ON power to the video sources and monitors connected to the VEEMUX.
LED MATRIX
(not available on all models)
The LED Matrix is a grid of LEDs on the front panel of the VEEMUX. This grid is used to provide a visual indication of all connections between video sources and destinations. To determine if an input (video source) is connected to an output (video destination), follow the LEDs down and to the right (respectively) until they intersect. The illuminated LED at the point of intersection indicates the input is connected to the output by the VEEMUX.
OUT | IN 1 2 3 4 5 6 7 8 |
| 1 |
2
3
4
5 
6
7
8
Figure 5- LED Matrix showing input 5 connected to output 5
6
