RFT2 Rack Kit Installation Guide
Step | Detail |
6.Attach the left slide rail assembly to the rack mounting rail by using (4)
7.Repeat for the right slide rail assembly.
8.Extend the slides from the rack.
9.Install the LCD/keyboard assembly into the rack. Lift the tray assembly and approach the rack with the rear of the tray facing the rack enclosure. Align the tray assembly with the slide rails in the rack. Carefully assemble the two slide members together. Push the tray assembly in until the slides latch together. Release the lock mechanisms as shown in step 3 in order to slide the tray assembly completely closed.
You are now ready to install the Cable Management System. See next page.
07/01/06 Rev 1.0 | Page 5 of 13 |
