Neuro Logic Systems 17, 19 RFT2 Rack Kit Installation Guide On-Screen Display OSD Menus

RFT2 Rack Kit Installation Guide

On-Screen Display (OSD) Menus

The menu pages can be displayed by pressing the Menu button. Not all menu functions can be adjusted. (Menu items or layout may change without notice)

Picture: Controls for Picture Quality (most of these settings are optimized by using

the “Auto Adjust” feature in the VGA Adjust menu option). Brightness

Contrast

Dimming

Sharpness

VGA Adjust: Adjusts the way the picture is displayed.

H Position: moves the image horizontally

V Position: moves the image up or down

H Size: increases the width of the image

Phase: Adjusts horizontal scan rate – Set by Auto Adjust

Auto Adjust*

Auto Color

Temperature: Controls for picture “coolness” or “warmth”. User

4200k

5000k

6500k

7500k

9300k

Setup: Reset: Resets all settings back to factory defaults.

Source: Normally auto-sensing based on what cable is connected. Manual switching can be used if 2 cables are connected at once.

VGA

DVI

Information: Displays various information about the LCD such as bios version and current resolution settings.

Exit: Quits OSD. This may also be obtained by letting the OSD time out (the period of inactivity where no buttons are pressed).

*Auto-Adjustment will reset all parameters to the optimum values which the LCD determines. This is the optimum method of setting up the LCD.

07/01/06 Rev 1.0 Page 10 of 13