2Set the desired interval between each shot.

•Use JKto select an item , and use HIto set the time.

•Press the kbutton when setting is complete.

Intvl timer shooting

m s

00 30

Edit

Section Reference

3Press the dbutton to display the shooting screen.

4 Press the shutter-release button to shoot the first image.

•The shutter is automatically released at the specified interval to shoot subsequent images.

• The monitor turns off and the power-on

 

25m 0s

lamp flashes during the intervals between

1/250 F5.6

 

840

 

 

shots (when the battery is used).

5When the desired number of images have been taken, press the shutter-release button.

•Shooting ends.

•Shooting ends automatically when the internal memory or memory card becomes full.

B Notes About Interval Timer Shooting

•To prevent the camera from turning off unexpectedly during shooting, use a fully charged battery.

•If the AC Adapter EH-62F (available separately; E87) is used, this camera can be powered from an electrical outlet. Do not, under any circumstances, use an AC adapter other than the EH-62F. Failure to observe this precaution could result in overheating or damage to the camera.

•Do not rotate the mode dial to a different setting while performing interval timer shooting.

•If the shutter speed is slow and saving an image takes time compared to the specified interval, some of the shots during interval timer shooting may be canceled.

E38