Nikon 26459, P340 settings, Print date not, Hide info is selected for Photo info of Monitor

Problem		Cause/Solution	A
	• The camera automatically turns off to save power		23
	•	(auto off function).
Camera turns off		The camera or battery has become too cold and	F3
without	•	cannot operate properly.
warning.		The inside of the camera has become hot. Leave the	–
		camera off until the inside of the camera has cooled,
		and then try turning it on again.
	• The camera is off.		22
	• The battery is exhausted.		22
	• The camera has entered standby mode to save		23
		power. Press the power switch, shutter-release
		button, cbutton or b(emovie-record) button,
		or rotate the mode dial.
The monitor is	• The flash lamp flashes while the flash is charging.		54
		Wait for the flash to charge.
blank.	•
		The camera and computer are connected via a USB	97,
		cable.	101
	• The camera and TV are connected via an HDMI cable.		97,
	• Interval timer shooting in progress.		E15
			E37
	•	Wi-Fi is connected.	95,
			E63
Monitor is hard	• Adjust the monitor brightness.		92,
			E68
to see.
	•	The monitor is dirty. Clean the monitor.	F6
				Technical
	• If the camera clock has not been set, the “Date not		24, 92,
		set” indicator flashes during shooting and movie	E66
		recording. Images and movies saved before the clock
recording are		is set are dated “00/00/0000 00:00” or “01/01/2014		Notes
		from the Time zone and date option in the setup
Date and time of		00:00” respectively. Set the correct time and date		and
not correct.		menu.
	• The camera clock is not as accurate as ordinary		92,	Index
		watches or clocks. Periodically compare the time of	E66
		the camera clock with that of a more accurate
		timepiece and reset as required.
No information	Hide info is selected for Photo info of Monitor		92,
displayed in
	settings in the setup menu.		E68
monitor.
Print date not	Time zone and date has not been set in the setup		24, 92,
available.	menu.		E66

F9