Nikon 26459, P340 Off, Off, Off, Auto, Auto, Matrix, Single, Normal, Single AF, Single AF, • Default setting: Target finding AF

Option	Description	A
Metering	Allows you to set the method that the camera uses
	to measure the brightness of the subject.	E34
	• Default setting: Matrix
Continuous	Allows you to select single or continuous shooting.	E35
	• Default setting: Single
	Allows you to control the camera’s sensitivity to light.
	• Default setting: Auto
ISO sensitivity	When Auto is selected, Eis displayed in the	E39
	monitor while shooting if ISO sensitivity increases.
	• In D (manual) mode, when set to Auto or Fixed
	range auto, the ISO sensitivity is fixed at ISO 80.
Exposure	The exposure (brightness) can be changed
	automatically during continuous shooting.	E40
bracketing
	• Default setting: Off
			Shooting
	• Default setting: Target finding AF
AF area mode	Allows you to change the method of how the
	camera selects the focus area for autofocus.	E41
			Features
Autofocus mode	halfway, or Full-time AF, which continues focusing	E44
	Allows you to select either Single AF, which focuses
	only when the shutter-release button is pressed
	even when the shutter-release button is not pressed
	halfway.
	• Default setting: Single AF
Flash exp. comp.	Allows you to adjust the flash output.	E44
	• Default setting: 0.0
Noise reduction	Allows you to set the strength of the noise reduction
	function that is normally performed when saving	E45
filter	images.
	• Default setting: Normal
Built-in ND filter	Allows you to select On, Auto or Off for the built-in
	ND filter.	E46
	• Default setting: Off
	Allows you to prevent loss of contrast details in
Active D-Lighting	highlights and shadows and well reproduce the
	natural contrast that is seen with the naked eye when	E47
	shooting images.
	• Default setting: Off

67