Using the Screen for Selecting Images

When an image selection screen such as the one

shown on the right is displayed while operating the camera, follow the procedures described below to select the images.

Erase selected images

Back

1Use the multi selector JKor rotate it to select the desired image.

Move the zoom control (A1) toward g(i) to switch to full-frame playback, or f(h) to switch to thumbnail playback.

Only one image can be selected for Rotate image, Choose key picture, and Welcome screen. Proceed to step 3.

Erase selected images

Back

2Use HIto select ON or OFF (or the number of copies).

When ON is selected, a check mark (S) is displayed with the image. Repeat steps 1 and 2 to select additional images.

Erase selected images

Back

Features Playback

3Press the kbutton to apply the image selection.

When a confirmation dialog is displayed, follow the on-screen instructions.

85