Error Messages

Refer to the table below if an error message is displayed.

Display

Cause/Solution

A

 

 

Battery temperature

 

 

 

 

is elevated. The

The camera turns off automatically. Wait until

 

 

 

camera will turn off.

 

 

 

the camera or battery temperature has cooled

–

 

 

 

The camera will turn

 

before resuming use.

 

 

 

off to prevent

 

 

 

 

 

 

 

overheating.

 

 

 

 

 

 

 

 

 

Memory card is write

The write-protect switch is in the “lock” position.

 

 

 

Slide the write-protect switch to the “write”

–

 

protected.

 

position.

 

 

 

 

 

 

 

This card cannot be

An error occurred while accessing the memory

 

 

 

used.

card.

 

 

 

 

• Use an approved card.

14, F29

 

This card cannot be

• Check that the terminals are clean.

 

 

 

 

read.

• Confirm that the memory card is correctly

 

 

 

 

inserted.

 

 

 

 

The memory card has not been formatted for

 

 

 

 

use in the camera.

 

 

 

Card is not

Formatting deletes all data saved on the

 

 

 

memory card. If you need to keep copies of any

 

 

 

formatted. Format

F5

 

images, make sure to select No and save the

 

card?

copies to a computer or other medium before

 

 

 

 

 

 

 

 

formatting the memory card. Select Yes and

 

 

 

 

press the kbutton to format the memory card.

 

 

 

 

The write-protect switch of the Eye-Fi card is in

–

Reference

 

the “lock” position.

 

 

 

 

 

 

Not available if Eye-Fi

An error occurred while accessing the Eye-Fi

 

 

 

card.

 

 

 

card is locked.

 

 

Section

 

• Check that the terminals are clean.

14

 

 

 

 

 

• Confirm that the Eye-Fi card is correctly

 

 

 

 

inserted.

 

 

 

Out of memory.

Delete images or insert a new memory card.

14, 29,

 

 

82

 

 

 

 

 

 

E91