![](/images/backgrounds/201395/201395-262220x1.png)
| Display | Cause/Solution | A | |
|
| The camera could not receive the |
| |
|
| communication signal from the smart device. | ||
| No access. | Select Connect to smart device in the | ||
| ||||
|
| options menu, and wirelessly connect the |
| |
|
| camera and smart device again. |
| |
|
|
|
| |
|
| The camera failed to establish the connection |
| |
|
| while receiving the communication signals |
| |
| Could not connect. | from the smart device. Select a different | ||
| channel in Channel in Options in the | |||
|
| |||
|
| options menu and establish the wireless |
| |
|
| connection again. |
| |
|
|
|
| |
|
| A cable was connected to the camera while the |
| |
|
| camera and smart device were wirelessly |
| |
| connected, the battery level became low, or the | |||
| terminated. | connection was aborted due to poor | ||
|
| connectivity. Check the status of the camera |
| |
|
| and establish the wireless connection again. |
| |
|
| A lens error occurred. |
| |
| Lens error | Turn the camera off and then on again. If the | ||
| error persists, contact your retailer or Nikon- | |||
|
|
| ||
|
| authorized service representative. |
| |
|
|
|
| |
|
| An error occurred while communicating with |
| |
| Communications | the printer. | ||
| error | Turn the camera off and reconnect the USB | ||
|
| |||
|
| cable. |
| |
|
| An error occurred in the camera’s internal |
| |
|
| circuitry. |
| |
SectionReference | System error | Turn the camera off, remove and reinsert the | ||
battery, and turn the camera on. If the error | ||||
| ||||
|
|
| ||
|
| persists, contact your retailer or Nikon- |
| |
|
| authorized service representative. |
| |
|
|
|
|
E94