Step 4: Network Settings

Step 4: Network Settings

❚❚FTP Upload

If you selected FTP upload in Step 4 on page 9, follow the steps below to connect to an existing ftp server.

1Obtain or select an IP address.

Highlight one of the following options and press 2.

Obtain automatically: Select this option if the network is configured to supply the IP address automatically.

Enter manually: When prompted, enter an IP address and subnet mask by pressing 4 and 2 to highlight segments and 1 and 3 to change. Press J to proceed when entry is complete.

2Confirm the IP address.

The camera IP address will be displayed as shown at right; press J.

3Choose the server type.

Highlight FTP or SFTP (secure ftp) and press 2.

AFirewall Settings

Ports 21 and 32768 through 61000 are used for ftp, ports 22 and 32768 through 61000 for sftp. File transfer may be blocked if the server firewall is not configured to allow access to these ports.

16

Page 30
Image 30
Nikon 6MWA0711-01 user manual FTP Upload, Obtain or select an IP address, Confirm the IP address, Choose the server type