Nikon AX-110 manual Before Operating the Scanner, Power Supply Precautions

2. Before Operating the Scanner

2. Before Operating the Scanner

2.1Power Supply Precautions

In order to use the ScanTouch 110 safely and correctly, and to prevent problems, pay careful attention to the following points:

• Be sure to use an AC100V-120V/AC 200V - 240V, 50/60Hz power supply. The power cord should be changed according to the power voltage.

When using a power voltage of more than AC 125V

Use a suitable power cord compliant with the safety standards of the country in which it is used, with a plug of AC 250V, 15A rating (NEMA 6P-15), and insulation of at least SVT type and more than AWG18 in thickness.

When using a power voltage of AC 125V or less

Use a suitable power cord compliant with the safety standards of the country in which it is used, with a plug of AC 125V, 10A rating and insulation of at least SVT type and more than AWG18 in thickness.

•Be sure that the electrical outlet of the power supply is grounded. Carry out the grounding in common with the other machines it is being connected with. Unless common grounding is used, a ground loop will occur, which will cause electric shock and noise static.

* The shape of the plug depends on the country of use.

2 Nikon ScanTouch 110 User's Manual