Connecting the Scanner, Before Connection

4. Connecting the Scanner

4.1Before Connection

Before connecting the cables, confirm that all devices, including the computer system and the scanner, are turned off.

Power OFF

For an IBM PC/AT or compatible in which a SCSI board has not been installed, install a SCSI board as explained in the manual supplied with the board.

Note: Make sure that the PC is powered off before installing the SCSI board.

When installing a SCSI board for the first time, be careful not to set conflicting I/O addresses, interrupt numbers, or graphic board DMA channels.

16	Nikon ScanTouch 110 User's Manual