Nikon COOLPIX5400 Continuous, Using a Flash, Focus, Exposure, and White Balance, Memory Buffer

Models: COOLPIX5400

1 173
Download 173 pages 42.58 Kb
Page 76
Image 76

Continuous

Using a Flash

More on Photography

At settings other than Single, the built-in Speedlight turns off automatically and will not fire even when lighting is poor. Optional Speedlights mounted on the accessory shoe can be used at settings other than Ultra HS.

Focus, Exposure, and White Balance

At settings other than Single, focus, exposure, and white balance are determined by the first picture in each series.

Digital Zoom

Digital zoom is not available at settings of Multi-shot 16 and Ultra HS.

Noise Reduction ( 111)

Noise reduction can not be used in combination with settings other than Single.

Ultra HS

Ultra HS can not be used in combination with BSS ( 97) or bracketing ( 109). If the monitor is swivelled to point in the same direction as the lens during shooting, the display in the monitor will be inverted.

During shooting, the zoom indicator in the monitor will move from S (start) to E (end). To interrupt shooting before one hundred pictures have been recorded, lift your finger from the shutter-release button.

The Memory Buffer

During shooting, pictures are stored in a temporary memory buffer before being trans- ferred to the memory card for permanent storage. You can continue to take pictures as long as room is available in the buffer. When the buffer is full, a (wait) icon will be displayed and shooting will be suspended. More pictures can be taken as soon as enough memory becomes available in the buffer.

Continuous

At settings other than Single, the current “continu- ous” setting is shown by an icon in the monitor when the camera is in P, S, A, or M mode.

64

Page 76
Image 76
Nikon COOLPIX5400 manual Continuous, Using a Flash, Focus, Exposure, and White Balance, Memory Buffer