Using the Built-in Flash

The camera supports a variety of flash modes for photographing poorly lit or backlit subjects.

❚❚Using the Built-in Flash: i, k, p, n, and oModes

1Choose a flash mode (0 48).

2Take pictures.

The flash will pop up as required when the shutter-release button is pressed halfway, and fire when a photograph is taken. If the flash does not pop up automatically, DO NOT attempt to raise it by hand. Failure to observe this precaution could damage the flash.

❚❚Using the Built-in Flash: P, S, A, and M Modes

z

1Raise the flash.

Press the M (Y) button to raise the flash.

2Choose a flash mode (0 48).

3Take pictures.

The flash will fire whenever a picture is taken.

M(Y) button

ALowering the Built-in Flash

To save power when the flash is not in use, press it gently downward until the latch clicks into place.

47

Page 63
Image 63
Nikon 13313, D3200 manual Using the Built-in Flash i, k, p, n, and oModes, Using the Built-in Flash P, S, A, and M Modes