Nikon D5200 18105mm Kit, 1501, 1507, 1511 Shutter-Release Button, Standby Timer, Built-in Flash

AThe Shutter-Release Button

The camera has a two-stage shutter-release button. The camera focuses when the shutter- release button is pressed halfway. To take the photograph, press the shutter-release button the rest of the way down.

Focus: press halfway Shoot: press all the way down

AThe Standby Timer

The viewfinder and information display will turn off if no operations are performed for about eight seconds, reducing the drain on the battery. Press the shutter-release button halfway to reactivate the display. The length of time before the standby timer expires automatically can be selected using Custom Setting c2 (Auto off timers; 0 160).

Exposure meters on Exposure meters off

Exposure meters on

AThe Built-in Flash

If additional lighting is required for correct exposure in i mode, the built-in flash will pop up automatically when the shutter-release button is pressed halfway (0 45). If the flash is raised, photographs can only be taken when the flash-ready indicator (M) is displayed. If the flash-ready indicator is not displayed, the flash is charging; remove your finger briefly from the shutter-release button and try again.

To save battery power when the flash is not in use, return it to its closed position by pressing it gently downward till the latch clicks into place.

A Using a Zoom Lens	Zoom in
Use the zoom ring to zoom in on the subject so that it fills a
larger area of the frame, or zoom out to increase the area	Zoom ring
visible in the final photograph (select longer focal lengths
on the lens focal length scale to zoom in, shorter focal
lengths to zoom out).
	Zoom out

23