Nikon 1503, D5200 Using Optional WR-R10 and WR-T10 Wireless Remote Controllers, the WR-R10/WR-T10

❚❚Using Optional WR-R10 and WR-T10 Wireless Remote Controllers (0210)

When a WR-T10 is used in combination with a WR-R10, the shutter-release button on the WR-T10 performs the same functions as the camera shutter-release button, allowing wireless remote control continuous and self-timer photography. For more

information, see the manual provided with	WR-R10	WR-T10
the WR-R10/WR-T10.

DBefore Using the ML-L3 Remote Control

Before using the ML-L3 for the first time, remove the clear plastic battery-insulator sheet.

DRemote Control Photography

In quick-response (ML-L3) or delayed remote (ML-L3) release mode, the camera responds only to the shutter-release button on the ML-L3 remote control. Choose a different release mode when using WR-R10/WR-T10 wireless remote controllers.

ACover the Viewfinder

When taking photos without your eye to the viewfinder, remove the DK-20 rubber eyecup

DK-20 rubber eyecup DK-5 eyepiece cap

(q) and insert the supplied DK-5 eyepiece cap as shown (w). This prevents light entering via the viewfinder interfering with exposure. Hold the camera firmly when removing the rubber eyecup.

q

w

DUsing the Built-in Flash

Before taking a photograph with the flash in P, S, A, M, or 0 mode, press the M (Y) button to raise the flash and wait for the Mindicator to be displayed in the viewfinder (0 23). Shooting will be interrupted if the flash is raised while a remote control mode is in effect or after the self-timer has started. If the flash is required, the camera will only respond to the ML-L3 shutter-release button once the flash has charged. In auto, scene, and special effects modes in which the flash pops up automatically, the flash will begin charging when a remote control mode is selected; once the flash is charged, it will automatically pop up and fire when required.

In flash modes that support red-eye reduction, the red-eye reduction lamp will light for about one second before the shutter is released in quick-response remote mode. In delayed remote mode, the self-timer lamp will light for two seconds, followed by the red-eye reduction lamp which lights for one second before the shutter is released.

ASee Also

For information on choosing the duration of the self-timer and the number of shots taken, see Custom Setting c3 (Self-timer; 0 160). For information on choosing how long the camera will wait for a signal from the remote, see Custom Setting c4 (Remote on duration (ML-L3); 0 161). For information on controlling the beeps that sound when the self-timer and remote control are used, see Custom Setting d1 (Beep; 0 161).

32