Nikon D5200 Bracketing, Choose a bracketing option, Place the cursor in the information display

Bracketing

Bracketing automatically varies exposure, white balance, or Active D-Lighting (ADL) settings slightly with each shot, “bracketing” the current value. Choose in situations in which it is difficult to set exposure or white balance and there is not time to check results and adjust settings with each shot, or to experiment with different settings for the same subject.

Option	Description
	Vary exposure over a series of three photographs.

AE
k bracketing
	Shot 1: unmodified	Shot 2: exposure reduced Shot 3: exposure increased
WB	Each time the shutter is released, the camera creates three images, each with a
m bracketing	different white balance. Not available with image qualities of NEF (RAW).
ADL	Take one photo with Active D-Lighting off, and another at the current Active
! bracketing	D-Lighting setting.

1Choose a bracketing option.

After pressing G to display the menus, highlight Custom Setting e2 (Auto bracketing set) and press 2.

Gbutton

The options shown at right will be displayed. Highlight the desired bracketing type and press J.

2Place the cursor in the information display.

If shooting information is not displayed in the monitor, press the P button. Press the P button again to place the cursor in the information display.

Pbutton Information display

83