Nikon D60OUTFIT, D60BODY, 25438 Attaching a Lens, Turn the camera off and remove the body Cap

Attaching a Lens

Care should be taken to prevent dust from entering the camera when exchanging lenses.

1Turn the camera off and remove the body

cap.

First Steps

Remove the rear lens cap from the lens.

2Keeping the mounting index on the lens aligned with the mounting index on the camera body, position the lens in the camera’s bayonet mount and rotate the lens in the direction shown until it clicks into place.

If the lens is equipped with an A-M or M/A-M switch, select A (autofocus) or M/A (autofocus with manual priority).

CLenses for Autofocus

Autofocus with this camera is supported only by AF-S and AF-I lenses. AF-S and AF-I lenses are equipped with an autofocus motor. Autofocus is not possible when any other type of lens is

18 mounted, regardless of the autofocus capabilities of the lens itself.