Nikon 25438, D60OUTFIT Eyepiece Cap, Rubber Eyecup DK-20 and insert, Rubber eyecup, On Duration a

Rubber Eyecup DK-20

Eyepiece Cap DK-5

Releasing the Shutter

4Shoot.

Self-timer: Press the camera shutter-release button halfway to focus, then press it the rest of the way down to start the self-timer. The self-timer lamp will start to blink, stopping two seconds before the photograph is shot.

The release mode is set to Single frame or

Continuous after the shutter is released.

Remote control: From a distance of 5m (16ft.) or less, aim the transmitter on the ML-L3 at the infrared receiver on the camera and press the shutter-release button on the ML-L3. In delayed remote mode, the self-timer lamp will light for about two seconds before the shutter is released. In quick-response remote mode, the self-timer lamp will flash after the shutter has been released.

Changing Shooting Settings

CEyepiece Cap

Attach the eyepiece cap to the viewfinder eyepiece with remote shooting. Remove

Rubber Eyecup DK-20 and insert the

supplied Eyepiece Cap DK-5 as shown at right. This prevents light entering via the viewfinder interfering with exposure. Hold the camera steady when removing

the rubber eyecup.

Remove the Rubber Eyecup DK-20 when attaching other viewfinder eyepiece accessories (A 155).

CTurning off the Self-Timer

The self-timer mode is turned off when the camera is turned off. Single-frame or continuous release mode is automatically restored when self-timer mode ends.

CMore Information

For more information about changing the length of time the camera will wait for a signal from the remote before canceling delayed or quick-response remote modes, see Custom Setting 17 (Remote

56 on Duration; A 115)