107
Shooting Options: The Shooting Menu
Menu Guide

Copying White Balance from a Photograph

A white balance value copied from an existing photograph can be used for preset manual.
Note that only one photograph can be selected at a time as a source for preset manual.
Each time new preset data is acquired with Use photo, the existing preset data will be
overwritten.
1Select White balance>Preset manual in the shooting menu
and press the multi selector right.
2Highlight Use photo and press the multi selector right.
To use the current source photograph as preset data, highlight This
image and press the multi selector right. The setting will be applied.
To choose a new photograph, highlight Select image and press the
multi selector right. Proceed to step 3.
3Press the multi selector up or down to highlight the

folder containing the desired source photograph.

4Press the multi selector right.
Images in the selected folder will be displayed.
5Press the multi selector left or right to highlight
photograph.
Press and hold K to enlarge display of the selected photograph.
Press Q to apply the setting. The display will return to shooting
menu.
BSource for Preset Manual
Images displayed may include those created with other cameras, but only photographs created
with D60 can be used as source for preset manual.
Whitebalance
Presetmanual
Measure
Usephoto
Whitebalance
Usephoto
Thisimage
Selectimage
Whitebalance
Selectimage
7 8 9
10 11 12
Whitebalance
Selectimage
Zoom OK
7 8 9
10 11 12
Whitebalance
Selectimage
Zoom OK