3Adjust settings.

 

The maximum value for auto

 

ISO sensitivity can be selected

 

using Maximum sensitivity

 

(the minimum value for auto

 

 

 

 

ISO sensitivity is automatically set to ISO 100; note that if the

 

value selected for Maximum sensitivity is lower than the

 

value currently selected for ISO sensitivity, the value selected

 

for Maximum sensitivity will be used). In exposure modes e

 

and g, sensitivity will only be adjusted if underexposure would

 

result at the shutter speed selected for Minimum shutter

 

speed (1/4000–1 s, or Auto; in modes fand h, ISO sensitivity

 

will be adjusted for optimal exposure at the shutter speed

 

selected by the user). If Auto (available only with CPU lenses;

 

equivalent to 1/30 s when a non-CPU lens is used) is selected,

 

the camera will choose the minimum shutter speed based on

 

the focal length of the lens (auto shutter-speed selection can

 

be fine-tuned by highlighting Auto and pressing 2; for

 

example, faster values can be used with telephoto lenses to

 

reduce blur). Shutter speeds slower than the minimum value

S

 

may be used if optimum exposure can not be achieved at the

 

ISO sensitivity value selected for Maximum sensitivity. Press

 

Jto exit when settings are complete.

When On is selected, the viewfinder and control panel show ISO-AUTO. When sensitivity is altered from the value selected by the user, these indicators blink and the altered value is shown in the viewfinder.

112