1 IX-NIKKOR lenses can not be used.

2Vibration Reduction (VR) supported with VR lenses.

3 Spot metering meters selected focus point (0 115).

4 The camera’s exposure metering and flash control systems do not work properly when shifting and/or tilting the lens, or when an aperture other than the maximum aperture is used.

5 Can not be used with shifting or tilting.

6 Manual exposure mode only.

7 Can be used with AF-S and AF-I lenses only (0 373). For information on the focus points available for autofocus and electronic rangefinding, see page 373.

8 With maximum effective aperture of f/5.6 or faster.

9 When focusing at minimum focus distance with AF 80–200mm f/2.8, AF 35– 70mm f/2.8, AF 28–85mm f/3.5–4.5 <New>, or AF 28–85mm f/3.5–4.5 lens at maximum zoom, in-focus indicator may be displayed when image on matte

screen in viewfinder is not in focus. Adjust focus manually until image in viewfinder is in focus.

10With maximum aperture of f/5.6 or faster.

11Some lenses can not be used (see page 374).

12Range of rotation for AI 80–200mm f/2.8 ED tripod mount is limited by camera body. Filters can not be exchanged while AI 200–400mm f/4 ED is mounted on camera.

13If maximum aperture is specified using Non-CPU lens data (0 212), aperture value will be displayed in viewfinder and control panel.

14Can be used only if lens focal length and maximum aperture are specified using Non-CPU lens data (0 212). Use spot or center-weighted metering if desired results are not achieved.

15For improved precision, specify lens focal length and maximum aperture using Non-CPU lens data (0 212).

16Can be used in manual exposure modes at shutter speeds slower than flash sync speed by one step or more.

17Exposure determined by presetting lens aperture. In aperture-priority auto exposure mode, preset aperture using lens aperture ring before performing AE lock and shifting lens. In manual exposure mode, preset aperture using lens aperture ring and determine exposure before shifting lens.

18Exposure compensation required when used with AI 28–85mm f/3.5–4.5, AI 35– 105mm f/3.5–4.5, AI 35–135mm f/3.5–4.5, or AF-S 80–200mm f/2.8D. See teleconverter manual for details.

19Requires PK-12 or PK-13 auto extension ring. PB-6D may be required depending on camera orientation.

20Use preset aperture. In aperture-priority auto exposure mode, set aperture using focusing attachment before determining exposure and taking photograph.

PF-4 Reprocopy Outfit requires PA-4 Camera Holder.

Noise in the form of horizontal lines may appear in pictures taken with AF-S Zoom

n

Nikkor 24–85 mm f/3.5–4.5G (IF) lenses at ISO sensitivities over 6400; use manual

 

focus or focus lock.

372