DMemory Card Icons

The memory cards currently inserted in the camera are indicated as shown (the example at right shows the icons displayed when both an SD and a CompactFlash card are inserted). If the memory card is full or an error has occurred, the icon for the affected card will blink (0 419).

AUsing Two Memory Cards

See page 89 for information on choosing the roles played by each card when two cards are inserted in the camera.

ARemoving Memory Cards

Control panel

Information display

s

After confirming that the access lamp is off, turn the camera off and open the memory card slot cover.

SD memory cards: Press the card in to eject it (q). The memory card can then be removed by hand.

CompactFlash memory cards: Press the eject button (q) to partially eject the card (w). The memory card can then be removed by hand. Do not push on the memory card while pressing the eject button. Failure to observe this precaution could damage the camera or memory card.

GB 16

GB 16

31