Jbutton
Image Dust Off Ref Photo

Gbutton ➜ Bsetup menu

Acquire reference data for the Image Dust Off option in

Capture NX 2 (available separately; for more information, see the Capture NX 2 manual).

Image Dust Off ref photo is available only when a CPU lens is mounted on the camera. A non-DX lens with a focal length of at least 50 mm is recommended. When using a zoom lens, zoom all the way in.

1 Choose a start option.

Highlight one of the following options and press J. To exit without acquiring image dust off data, press G.

•Start: The message shown

at right will be displayed and “rEF” will appear in the viewfinder and control panel displays.

•Clean sensor and then start: Select this option to clean the image sensor

before starting. The message shown at right will be displayed and “rEF” will appear in the viewfinder and control panel displays when cleaning is complete.

DImage Sensor Cleaning

Dust off reference data recorded before image sensor cleaning is

 

performed can not be used with photographs taken after image

 

U

sensor cleaning is performed. Select Clean image sensor and

then start only if the dust off reference data will not be used with

 

existing photographs.

 

327