b4: Easy Exposure Compensation Gbutton ACustom Settings menu

This option controls whether the Ebutton is needed to set exposure compensation (0 130). If On (Auto reset) or On is selected, the 0 at the center of the exposure display will blink even when exposure compensation is set to ±0.

Option

Description

Exposure compensation is set by rotating one of the command dials (see note below). The setting selected

On (Auto reset) using the command dial is reset when the camera or exposure meters turn off (exposure compensation settings selected using the Ebutton are not reset).

As above, except that the exposure compensation value

On selected using the command dial is not reset when the camera or exposure meters turn off.

Off

Exposure compensation is set by pressing the Ebutton and rotating the main command dial.

AChange Main/Sub

The dial used to set exposure compensation when On (Auto reset) or On is selected for Custom Setting b4 (Easy exposure compensation) depends on the option selected for Custom Setting f9 (Customize command dials) > Change main/sub (0 317).

Exposure mode

e

f

g

h

Customize command dials > Change main/sub

Off

 

On

Sub-command dial

 

Sub-command dial

Sub-command dial

 

Main command dial

Main command dial

 

Sub-command dial

 

N/A

U

288