EXPOSURE COMPENSATION BUTTON
If you wish to modify the exposure control (from the ISO stan- dard), use the Exposure Compensation system. Modification from
While pressing exposure compensation II! button, rotate com- mand dial to set desired compensation value. The following display appears on the LCD panel and viewfinder:
II! symbol
Electronic analog display with indications
from - 1 to +1 EV in 1/3 steps: Confirm the direction of
exposure (- or +).
Compensation value (from -5 to +5 EV in 1/3 steps):
Confirm amount of exposure compensation.
•Once set, exposure compensation remains fixed until reset.
Although II! symbol stays on to indicate that exposure compensation remains, compensation value and elec- tronic analog display disappear after you remove fin- ger from II! button. To confirm compensation value, press button again.
•Exposure compensation can also be achieved by setting film speed manually. See page 24.
52
