Nikon S3200 Connecting the Camera to a Printer, Turn off the camera Turn on the printer, E19

Connecting the Camera to a Printer (Direct Print)

Connecting the Camera to a Printer

1 Turn off the camera.

2Turn on the printer.

• Check printer settings.

3Connect the camera to the printer using the included USB cable.

•Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.

4The camera is automatically turned on.

• When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the Print selection screen (2).

Reference Section

1

2

Print selection

1 5/05

20 1 2

BIf the PictBridge Screen is not Displayed

Turn off the camera and disconnect the USB cable. Set Charge by computer (E62) in the camera’s setup menu to Off, then connect the camera again.

E19