Nikon S3200 manual F13

Troubleshooting

Problem	Cause/Solution	A
	• The desired image was sorted into a	70, E7
	category other than the category currently
	displayed.
	• Images recorded by a camera other than the	70, E8,
	COOLPIX S3200 and images copied using the	E46
The recorded images are	copy option cannot be displayed in auto sort
	mode.
not displayed in auto sort
	• Images recorded in internal memory or on	–
mode.
	the memory card may not be played back
	correctly if overwritten by a computer.
	• Up to 999 images or movie files can be	70, E8
	added to each category. If the desired
	category already contains 999 images, new
	images or movies cannot be added.
	• The camera is off.	21
	• Battery is exhausted.	20
	• USB cable is not properly connected.	72
Nikon Transfer 2 does not	• The camera is not recognized by the	–
	computer.
start when the camera is
	• Confirm system requirements.	73
connected to a computer.
	• Computer is not set to start Nikon Transfer 2	73
	automatically. For more information on
	Nikon Transfer 2, refer to help information
	contained in ViewNX 2.		Technical
	PictBridge startup screen may not be displayed
	With some PictBridge-compatible printers, the
The PictBridge startup	and it may be impossible to print images when		Notes
when the camera is		72, E62
	Auto is selected for the Charge by computer
screen is not displayed
connected to a printer.	option in the setup menu. Set the Charge by		and
	computer option to Off and reconnect the
	camera to the printer.		Index
	• Memory card contains no images. Replace
Images to be printed are	the memory card.	18
not displayed.	• Remove the memory card to print images
	from the internal memory.
	Paper size cannot be selected from the camera
	in the following situations, even when printing
	from a PictBridge-compatible printer. Select
Cannot select paper size	paper size from the printer.
with the camera.	• The printer does not support the paper size	72, E20,
	specified by the camera.	E21
	• The printer automatically selects the paper	–
	size.

F13