Nikon S3200 Turning the Camera On and Off, Turn the Camera On, Power Saving Function Auto Off

Step 1 Turn the Camera On

Turning the Camera On and Off

•When the camera is turned on, the power-on lamp (green) will light, and then the monitor will turn on (the power-on lamp turns off when the monitor turns on).

•To turn off the camera, press the power switch. When the camera is turned off, both the power-on lamp and the monitor turn off.

•To turn on the camera in playback mode, press and hold the c (playback) button. The lens will not extend.

CPower Saving Function (Auto Off)

If no operations are performed for a while, the monitor will turn off, the camera will enter standby mode, and the power-on lamp will flash. If no operations are performed for approximately another three minutes, the camera will turn off automatically.

To reactivate the monitor while the power-on lamp is flashing, press any of the following buttons:

-Power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b (e movie-record) button.

Flashes

Basic Steps for Shooting and Playback

8 m 0 s

9 5 0

No operations	No
	operations
performed
	performed
	3 min
Camera enters standby	Camera turns off
mode

• The time allowed to elapse before the camera enters standby mode can be changed from the Auto off option (A87) in the setup menu (A86).

• By default, the camera enters standby mode in about one minute when you are using shooting mode or playback mode.

• When the AC Adapter EH-62G (available separately) is used, the camera enters standby mode after 30 minutes (fixed).

21