Nikon S3200 manual Using the Flash Flash Modes, Press the multi selector Hmflash mode

Features That Can Be Set Using the Multi Selector

Using the Flash (Flash Modes)

The flash mode can be set to match the shooting conditions.

1 Press the multi selector H(mflash mode).

2 Press the multi selector Hor Ito choose the desired flash mode and press the kbutton.

•	See “Available Flash Modes” (A54) for more
	information.
•	If a setting is not applied by pressing the kbutton
	within a few seconds, the selection will be canceled.
		Auto

•When U (Auto) is applied, Dis only displayed for

a few seconds, regardless of Photo info settings (E53).

3 Frame the subject and take a picture.

• The flash lamp indicates flash status when the shutter- release button is pressed halfway.

- On: The flash will fire when you press the shutter- release button all the way down.

-Flashes: The flash is charging. Wait a few seconds and try again.

-Off: The flash will not fire when a picture is taken.

•If the battery is low, the monitor will be turned off while the flash is charging.

CEffective Range of the Flash

Shooting Features

When ISO sensitivity is set to Auto, the flash has a range of 0.5–4.5 m (1 ft 8 in.–14 ft) at the
maximum wide-angle zoom position and a range of 0.5–2.4 m (1 ft 8 in.–7 ft 10 in.) at the maximum
telephoto zoom position.	53