Problem

Cause/Solution

A

 

 

• If the camera clock has not been set, “Date not

20, E67

 

 

set” indicator flashes with shooting and movie

 

 

 

recording. Images and movies recorded before

 

 

 

clock is set are dated “00/00/0000 00:00” or “01/

 

 

Date and time of recording

01/2013 00:00” respectively. Set the correct time

 

 

and date from the Time zone and date option

 

 

are not correct.

 

 

in the setup menu.

 

 

 

 

 

 

• The camera clock is not as accurate as ordinary

22, E67

 

 

watches or clocks. Periodically compare the time

 

 

 

of the camera clock with that of a more accurate

 

 

 

timepieces, and reset as required.

 

 

No indicators displayed in

Hide info is selected for Photo info in Monitor

98, E70

 

monitor.

settings in the setup menu.

 

 

 

Print date not available.

The camera clock has not been set.

20, 98, E67

 

 

 

 

 

Date not appearing on

• The current shooting mode is one that does not

98, E72

 

images even when Print

support Print date.

 

date is enabled.

• The date cannot be imprinted on movies.

 

 

Screen for setting time zone

 

 

 

and date is displayed when

Clock battery was exhausted; all settings were

20, 22

 

the camera is turned on.

restored to their default values.

 

The camera settings reset.

 

 

 

 

 

 

Technical

Monitor turns off, and the

Battery temperature is high. Turn off the camera

 

and allow battery to cool down before resuming

 

 

power-on lamp flashes

use. After the lamp flashes for three minutes, the

25

 

rapidly.

camera will turn off automatically. Pressing the

 

IndexandNotes

 

power switch also turns off the camera.

 

 

 

 

F9