3Connect the camera to the printer using the included USB cable.
•Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.
4The camera automatically turns on.
• When properly connected, the PictBridge startup screen (1) is displayed in the camera monitor, followed by the Print selection screen (2).
1 |
|
|
| 2 |
| Print selection | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (E83) in the camera’s setup menu to Off, then connect the camera again.
E26