Playback and Shooting for Steps Basic

C Changing the Language or the Date and Time Setting

•You can change these settings using the Language and Time zone and date settings in the zsetup menu (A98).

•You can enable or disable daylight saving time in the zsetup menu by selecting Time zone and date followed by Time zone. Press the multi selector Kand then Hto enable daylight saving time and move the clock forward one hour. The clock moves back one hour when you disable daylight saving time. When the travel destination (x) is selected, the camera automatically calculates the time difference between the travel destination and the home time zone (w), and saves images using the date and time of the travel destination.

•If you exit without setting the date and time, Oflashes when the shooting screen is displayed. Use the Time zone and date setting in the setup menu to set the date and time (A98).

C Clock Battery

•The camera clock is powered by a built-in backup battery.

The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and it can run the clock for several days after about ten hours of charging.

•If the backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See “Preparation 4 Setting the Display Language, Date and Time” (step 3, A20) for more information.

C Imprinting the Shooting Date on Printed Images

•Set the date and time before shooting.

•You can permanently imprint the shooting date on images as they are captured by setting Print date in the setup menu (A98).

•You can use the ViewNX 2 software (A82) to print the shooting date on images that were captured without using the Print date option.

22