Setup Menu
wElectronic VR
Tap the bottom tab (A147) MTap z(Setup menu) MwElectronic VR
Choose whether or not to use electronic VR (vibration reduction), which reduces the effects of camera shake during shooting.
Auto
When taking still pictures, electronic VR is enabled when R(A10) is displayed in the monitor and all of the conditions below are met.
•The flash is turned off or set to slow sync mode.
•A slow shutter speed is used.
•Continuous is set to Single.
•The subject is dark.
When recording movies, electronic VR is enabled at all times.
Off (default setting)
Electronic VR is disabled.
Setup Camera Basic
BNotes on Electronic Vibration Reduction
• The effectiveness of electronic VR decreases as camera shake increases.
• The pictures taken using electronic vibration reduction may be somewhat “grainy” in appearance.
• Electronic VR does not function under the following conditions or in the following shooting modes:
- When slow sync with
- When exposure exceeds a certain length of time - When ISO sensitivity (A53) is set to Auto
- When Blink proof (A 77) is set to On in smart portrait mode
- In the following scene modes: Sports (A 64), Night portrait (A 64), Dusk/dawn (A66), Night landscape (A66), Museum (A68), Fireworks show (A68), and Backlighting
(A69)
• The angle of view (the area captured in the recorded movie) is smaller when electronic VR is
154
enabled during movie recording.