Shooting Smiling Faces (Smart Portrait Mode)
6qTouch shutter
Switch between the touch shutter (A45) and touch AF/AE (A50). Both are disabled when Smile timer is set to On (A77).
7eSkin softening
Enable skin softening. When the shutter is released, the camera detects one or more human faces (up to three), and processes the image to soften facial skin tones
before saving the picture.
The degree of skin softening applied can be selected from High, Normal (default setting), and Low. When Off is selected, the skin softening function is disabled.
•The effects of skin softening are not visible when framing pictures for shooting. Check the degree of skin softening performed in playback mode.
8yBlink proof
When On is selected, the camera automatically releases the shutter twice each time a picture is taken. Of the two shots, one in which the subject’s eyes are open is
saved.
•If the camera saved a picture in which the subject’s
eyes may have been closed, the dialog shown at right is displayed for a few seconds.
• When On is selected, the flash is disabled.
•The default setting is Off.
9aSmile timer
•On (default setting): The camera uses the face detection function to detect a human face, and then automatically releases the shutter whenever a smile is detected.
•Off: The camera does not release the shutter automatically with smile detection. Press the
10YWind noise reduction
Set whether or not to reduce wind noise during movie recording (A126, 130).
11nMovie AF mode
Select the autofocus mode during movie recording (A126, 129).
12DMovie options
Select the desired movie option when recording movies (A126, 128).
CSettings in Smart Portrait Mode
Shooting on More
There are functions with which this setting cannot be enabled. See “Camera Settings that Cannot Be Applied Simultaneously” (A 78) for more information.
77