Setup Menu

kAuto Off

Tap the bottom tab (A147) MTap z(Setup menu) MkAuto off

When the camera is on and a period of time passes without any operations having been performed, the monitor will be turned off and the camera will enter standby mode (A21) to save power.

In this option, set the time allowed to elapse before the camera enters standby mode. 30 s, 1 min (default setting), 5 min, and 30 min can be selected.

Setup Camera Basic

CWhen the Monitor Turns off for the Power Saving Function

Power-on lamp blinks in standby mode.

Camera turns off after three minutes passes in standby mode.

To reactivate the monitor while the power on lamp is blinking, press any of the following buttons:

-The power switch, shutter-release button, Abutton, or b(emovie-record) button

CAuto Off Settings

The time allowed to elapse before the camera enters standby mode is fixed in the following situations:

When a setting screen, mode selection menu, or setup menu is displayed: three minutes

During slide show playback: up to 30 minutes

158 When the AC adapter EH-62G is connected: 30 minutes