Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display

Description

 

Solution

A

 

O(blinks)

Clock not set.

Set date and time.

149

 

 

 

 

 

 

 

N

Battery exhausted.

Charge or change battery.

16, 18

 

Battery exhausted.

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn off camera, and allow

 

 

 

 

battery to cool down

 

 

 

 

before resuming use. After

 

 

 

 

five seconds, the monitor

 

 

P

 

will turn off, and the

 

 

Battery temperature is

power-on lamp will blink

 

 

Battery temperature

21

 

high.

rapidly. After the lamps

 

high

 

 

 

blink for three minutes, the

 

 

 

 

 

 

 

 

camera will turn off

 

 

 

 

automatically. Pressing the

 

 

 

 

power switch also turns off

 

 

 

 

the camera.

 

 

 

 

 

 

 

 

 

 

•

Refocus.

30, 31

 

 

 

•

Focus on another

52

 

Q(● blinks red)

Camera cannot focus.

 

subject positioned at the

 

 

 

same distance from the

 

Technical

 

 

 

 

 

 

 

camera as the intended

 

 

 

 

 

 

 

 

 

subject.

 

 

 

 

 

 

 

P

Camera cannot perform

Wait until message clears

 

Notes

Please wait for the

from display automatically

 

other operations until

–

camera to finish

when recording is

recording is complete.

 

and

recording.

complete.

 

 

 

 

 

 

 

 

Index

u

Write-protect switch is in

Slide write-protect switch

 

Memory card is write

25

“lock” position.

to “write” position.

 

protected.

 

 

 

 

 

 

 

 

 

 

 

 

 

P

 

•

Use approved card.

173

 

This card cannot be

 

 

used.

Error accessing memory

•

Check that connectors

24

 

 

 

are clean.

 

 

P

card.

•

 

 

Confirm that memory

24

 

 

 

This card cannot be

 

 

card is correctly inserted.

 

 

read.

 

 

 

 

 

175