Connecting to a TV

Printers and Computers Televisions, to Connecting

136

Operations with TV Connection

While images are displayed full-frame on the TV, the previous or next image can be viewed by dragging your finger across the camera monitor.

•By operating the zoom control, images can be displayed as thumbnails (A83) and image display can be enlarged (A85).

•When the first frame of a movie is displayed, the movie can be played back by holding your finger on the camera monitor and removing it after about one second.

•Tap the camera monitor to turn TV display off and display the image in the camera monitor. When images are displayed in the camera monitor, tap the controls displayed to operate the camera.

•Images will be automatically displayed on the TV in the following situations.

-No operations are performed for a few seconds.

-A slide show is played back.

-A movie is played back.

CUsing a TV Remote Control (HDMI Device Control)

The remote control of an HDMI-CEC-compatible TV can be used to control playback. Image selection, movie playback and pause, and switching between full-frame playback mode and 4- image thumbnail display mode are available.

•Set the HDMI device control setting (A164) of TV settings to On (default setting) and then connect the camera and TV using an HDMI cable.

•Aim the remote control at the TV when operating it.

•Refer to the TVs operating instructions for information about the TVs HDMI-CEC compatibility.