Setup Menu

gVibration Reduction

Tap the bottom tab (A150) MTap z(Setup menu) MgVibration reduction

Setup Camera Basic

158

Choose a vibration reduction option for shooting.

Vibration reduction reduces blur caused by slight hand movement known as camera shake, which commonly occurs when shooting with telephoto zoom applied or at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when taking still pictures.

Set Vibration reduction to Off when using a tripod to stabilize the camera during shooting.

gOn (default setting)

The vibration reduction is enabled.

kOff

Vibration reduction is disabled.

The current vibration reduction setting can be confirmed in the camera monitor when shooting (A10, 27). When Off is selected, no icon is displayed.

BNotes on Vibration Reduction

Vibration reduction may take a few seconds to activate after the power is turned on, or the camera enters shooting mode from playback mode. Wait until the image of the monitor stabilizes before shooting.

Due to characteristics of the vibration reduction function, images displayed in the camera’s monitor immediately after shooting may be displayed blurry.

Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.